Complete lines with matched throughput & 4x 100-cavity CNC trays
Turnkey Vape Filling & Capping Line
Fill 5 carts per stroke, then seal the whole 100-cavity tray in one press.
Turnkey Pre-Roll Cone Line
Cold-mill flower, fill 300 cones per cycle, crown-fold, then weigh, jar and seal.
Turnkey Extraction, Winterization & Distillation Line
Cryogenic centrifuge wash, falling-film solvent recovery, vacuum decarb, and wiped-film short-path molecular distillation.
Turnkey Solventless Hash, Rosin & Vape Curing Line
Wash fresh-frozen flower in jacketed ice water, freeze-dry blonde hash, press live rosin on 20-ton PID platens, and low-temp jar-cure for vapes.
Nach Kategorie filtern, Datenblatt prüfen & in den Warenkorb legen
5-Needle Heated CNC Gantry Filler
Fills 5 cartridges per stroke across a 100-cavity CNC tray in 70 seconds. 3-zone PID heating up to 130 C keeps thick live resin and distillate flowing with +/- 0.01 ml repeatability.
Four-Column Pneumatic Platen Tray Vape Capping Press
Four-column pneumatic platen press with dual-hand safety buttons and programmable dwell timer, sealing an entire 100-cavity tray of press-fit cartridges or disposables in 3 seconds.
Single-Nozzle X-Y-Z CNC Tray Filler
Your operator loads a 100-cavity tray and presses start. Closed-loop servo gantry indexes across all 100 cartridges automatically with Suck-Back anti-drip control.
Automatic CNC Rotary Torque Screw Capper
Servo or clutch rotary driver tightens threaded 510 mouthpieces across a 100-cavity tray without stripping threads, 1,200 to 2,000 per hour.
Dual-Chamber & Dual-Flavor Heated Vape Filling Machine
Twin independent heated reservoirs and dual servo metering pumps feeding a twin-needle heated dispensing head to fill both chambers of dual-flavor disposables simultaneously.
Semi-Automatic Benchtop Heated Vape Filling Machine
Benchtop heated stainless reservoir with servo peristaltic/piston metering pump, heated flexible wand/nozzle, and foot-pedal trigger for tray-in-place 510 cartridge and disposable filling.
Twin-Spring Dual-Column Manual Vape Arbor Capping Press
Heavy twin-spring parallel-guide manual arbor press for vertical, crack-free press-fit mouthpiece capping across 50-cavity or 100-cavity cartridge and disposable trays.
25ml PID Heated Syringe Filling Gun
Built for R&D runs and micro-batches. Digital PID controller holds your syringe barrel and Luer-Lock needle at constant temperature so thick oil never freezes mid-shot.
Automated Rotary Pre-Roll Cone Filler & Twister
Weighs, fills, tamps in 3 vertical stages, and Dutch-crown folds up to 1,800 cones per hour. Calibrated for 84 mm, 98 mm, and 109 mm King Size cones.
High-Capacity Vibratory Tray Pre-Roll Cone Filler (100 - 300 Cones/Cycle)
Commercial benchtop vibratory pre-roll cone filler with interchangeable 84 mm / 98 mm / 109 mm multi-cavity cartridge trays and adjustable amplitude control.
10-Head / 14-Head Dimpled Multihead Weigher for Sticky Flower & Edibles
Teflon/dimpled 304 stainless multihead combination weigher calibrated for low-target weights (1.0 g, 3.5 g, 5.0 g, 7.0 g, 14 g, 28 g) of resinous flower or infused gummies.
Automatic Glass Jar & Pop-Top Weighing, Nitrogen-Flush & Sealing Line
Turnkey linear or rotary indexing line for 3.5 g / 5 g / 10 g flower jars with precision weigh-fill, nitrogen purge, child-resistant cap torquing, induction liner sealing, and tamper band sleeve.
Rotary Premade Child-Resistant Zipper Mylar Pouch Fill & Seal Machine
8-station rotary premade pouch machine engineered to pick, date-code, unzip child-resistant pinch/press zippers, dose flower or gummies, nitrogen-flush, re-close zipper, and heat-seal.
Servo Heated Pectin & Gelatin Regulated Gummy Depositor
Benchtop or conveyor-indexed 10-nozzle servo heated piston depositor engineered for rapid-set pectin and gelatin formulations with +/- 1.5% dose weight uniformity.
Turnkey Rotary Monoblock Oil Cartridge Filling & Capping Line
Integrated 2-in-1 rotary indexing monoblock combining heated ceramic piston oil dosing, automatic mouthpiece pick-and-place, and press-fit/screw capping on a single chassis.
20-Ton Dual-PID Pneumatic Rosin Press
Pure solventless extraction with zero guesswork. CNC-milled 304 stainless drip plates hold +/- 1.5 C uniformity while programmable pneumatic stages prevent bag blowouts.
Automatic Dropper Bottle & Tincture Filling Line
Peristaltic dosing, dropper insertion and servo torque capping for 10 ml to 100 ml tincture bottles, up to 2,400 bottles per hour.
Closed-Loop Jacketed Botanical & Hemp Extraction System
Sanitary 304/316L stainless steel jacketed cryogenic ethanol and botanical extraction skid with tri-clamp sight glasses, PTFE/Viton seals, and pressure-tested vessel dossier.
Falling-Film & Rotary Vacuum Ethanol Solvent Recovery System
High-efficiency stainless vacuum evaporator and condenser skid engineered to recover food-grade ethanol after winterization and filtration at low thermal stress.
20L / 50L Industrial Rotary Evaporator
20 L or 50 L borosilicate rotary evaporator with a digital PID bath and double-coil condenser for fast, gentle ethanol recovery.
Pharmaceutical & Live Resin Bubble Hash Freeze Dryer (Lyophilizer)
Programmable shelf-heated vacuum freeze dryer (-40 C to -65 C cold trap) with stainless steel trays engineered for terpene-rich bubble hash, live rosin prep, and flower preservation.
50L / 100L Jacketed 316L Decarboxylation & Winterization Reactor
Sanitary 316L jacketed pressure/vacuum reactor with variable-speed anchor/propeller agitator, mechanical seal, condenser, and tri-clamp ports for controlled vacuum decarboxylation.
Low-Temp Closed-Loop Basket Ethanol Extraction Centrifuge
Jacketed cryogenic perforated-basket centrifuge with bidirectional VFD agitation wash and high-G spin cycle for 98% solvent removal from botanical biomass.
5-Shelf Digital PID Heated Vacuum Purge & Curing Oven
Direct-heated shelf vacuum purge oven with 5 independent aluminum/stainless shelves, digital PID temperature controller, and KF25 vacuum manifold for residual solvent purging.
Sanitary Rotor-Stator High-Shear Terpene & Beverage Homogenizer
High-RPM 316L stainless rotor-stator homogenizer (up to 18,000 RPM) for uniform terpene cutting into distillate, tincture emulsification, and topical cream dispersion.
20kHz Industrial Titanium Probe Ultrasonic Nano-Emulsifier
1,500W / 2,000W 20 kHz ultrasonic cavitation processor with Ti-6Al-4V titanium horn and soundproof enclosure or jacketed continuous flow cell for sub-100 nm water-soluble cannabinoid beverages.
Sanitary Water-Soluble Cannabinoid Powder Spray Dryer
Compact sanitary 304/borosilicate spray dryer with two-fluid atomizer nozzle and cyclone powder separator for converting emulsified extracts into instant water-soluble drink powders.
Vacuum Jacketed Double-Planetary High-Viscosity Paste & Topical Mixer
Vacuum-rated jacketed 316L double-planetary mixer with PTFE wall scrapers and high-speed disperser discs for bubble-free homogenization of high-viscosity balms, salves, and edibles.
Sanitary Ceramic Piston Lab & Pilot Jar/Syringe Dosing Machine
Valveless rotary ceramic piston pilot filler with heated hopper for ultra-accurate 0.5 g to 50 g dosing of concentrates, RSO syringes, topical jars, and oral drops.
Planetary Zirconia Jar Botanical & Isolate Micronizing Ball Mill
4-station planetary ball mill with zirconia or 304 stainless grinding jars and grinding media for reducing crystalline isolates and botanical extracts to sub-10 micron particle size.
Jacketed Horizontal Nano-Dispersion Zirconia Bead Mill
Chilled silicon-carbide / zirconia pin-type horizontal wet bead mill for continuous sub-200 nm wet milling of cannabinoid suspensions, transdermal gels, and liposomal formulations.
Low-RPM Cold-Milling Industrial Flower Shredder & Pre-Roll Grinder
High-torque, low-RPM whip/screen botanical mill that produces uniform fluffy particle size (2 mm / 3 mm / 4 mm interchangeable screens) for pre-roll cones without heating resin.
Commercial Wet & Dry Tumbler Bud Trimming Machine
Food-grade 304 stainless steel rotary tumbler trimmer with interchangeable wet and dry drums, variable-speed VFD blade reel, and kief/trim cyclone collector.
High-Torque Wet & Dry Stem Bucking / De-Budding Machine
Counter-rotating food-grade neoprene roller bucker with multi-aperture die plate (4 mm to 19 mm stems) that gently strips flowers from stalks without shattering trichomes.
Low-Temperature Heat-Pump Tray & Belt Botanical Dryer
Closed-loop dehumidifying heat-pump drying chamber (20 C to 55 C) with stainless perforated carts that preserves volatile terpenes and prevents mold.
Multi-Tier Flower Size Sorter & Grade Classifier
Gentle food-grade vibrating/belt screen classifier that separates A-grade tops, B-grade mids, popcorn buds, and shake/trim into 4 dedicated sanitary discharge chutes.
150L / 300L Jacketed Ice-Water Bubble Hash Washing Machine
Sanitary 304 stainless jacketed vortex ice-water hash washing vessel with programmable bidirectional VFD impeller, 2-inch tri-clamp bottom drain, and 6-sieve stainless micron collection stack (220u, 160u, 120u, 90u, 73u, 45u) for pure solventless trichome separation.
Jacketed Wiped-Film Short-Path Molecular Distillation System
Continuous high-vacuum (0.1 Pa) wiped-film short-path molecular distillation unit with PTFE/roller wipers, internal condenser coil, and dual gear pumps for refining decarboxylated crude oil into crystal-clear high-potency vape distillate.